/ Forged Heat Sinks / Forged Heat Sinks BACK
Forged Heat Sinks
Standard Products sizes ranging from 7mm x 7mm to 117mm x 61mm are listed below.
Customization is available. Please contact us directly!
Features & Benefits-
-Fins and base are one piece construction, an integral forming piece
-High aspect ratio up to 1: 100, increases the surface heat dissipation area
-Aluminum alloy, pure aluminum, copper and copper based with aluminum fin are doable materials
-To ensure no taper fins, to improve airflow smooth through
-High material density, increases thermal conductivity
-A wide range of geometric patterns - Line fins, Pin fins, Elliptical fins are available
Forged Heat Sinks
NO | Series | Features | Fin Type | L x W (mm) | Height (mm) | Clip | DATA SHEET |
---|---|---|---|---|---|---|---|
1 | SL | Forging / Small sizes / High fins | Pin / Line / Elliptical | 7x7 10x10 12x12 13x13 14x14 15x15 16x16 17x17 | 11 to 32 | Z-Bar | Data Sheet |
2 | LT | Micro Forging / Low Profile / High Density Fins | Line | 19x19 25x25 27x27 30x30 35x35 37x37 40x40 | 3 / 6 / 9 | Z-Bar | Data Sheet |
3 | LF | Micro Forging / Low profile / High Density Fins | Line | 19x19 25x25 27x27 30x30 35x35 37x37 40x40 45x45 | 6 / 10 / 13 | BGA Clip / Z-Bar | Data Sheet |
4 | HB | Hybrid Forging / Low Profile / Full Range of Sizes | Continuous Line | 19x19 21x21 22x22 23x23 24x24 25x25 27x27 29x29 30x30 31x31 33x33 34x34 35x35 37x37 40x40 42x42 45x45 50x50 | 6 / 10 / 13 | Z-Bar | Data Sheet |
5 | LFZ | Micro Forging / Low Profile / High Density Fins | Line | 40x40 45x45 48x48 50x50 54x54 60x60 | 6 / 10 / 13 | Z-Bar | Data Sheet |
6 | WZ | Forging / 40x40mm with Various Heights from 3 to 35mm | Eliptical | 40x40 | 3 / 4 / 5 / 6 / 7 / 10 / 15 / 20 / 25 / 30 / 35 | Z-Bar | Data Sheet |
7 | WS | Forging / Medium sizes / Good convection | Elliptical | 50x50 60x60 | 15 / 20 / 25 | Push Pin / Screw | Data Sheet |
8 | WPR | Forging / Medium Sizes / Good convection | Elliptical | 40x40 45x45 50X50 54x54 60x60 70x70 | 10 / 15 / 20 / 25 | Push Pin | Data Sheet |
9 | WPL | Forging / Medium Sizes / Good convection | Elliptical | 40x40 45x45 50X50 54x54 60x60 70x70 | 10 / 15 / 20 / 25 | Push Pin | Data Sheet |
10 | HBP | Hybrid Forging / Low Profile / Full range of Large Sizes | Continuous Line | 60x60 70x70 80x80 90x90 100x100 | 6 / 10 / 13 | Push Pin | Data Sheet |
11 | DC | Forging / Standard Sizes for DC/DC Convertor | Pin | 58x37 58x61 117x61 | 10 / 20 / 25 | Push Pin | Data Sheet |
There's no data. |